Here we will give more detail about the exact plan for our project, including each individual step we will take while working with the natural clay.
Our research questions:
- What was the experience of harvesting clay from the ground like?
- What was the experience of processing the clay like?
- How did it feel to shape and sculpt the clay? Will it be easy and intrinsic, or will it take a lot of trial and error?
- Will our clay objects survive being fired, and what changes will occur in the clay throughout that process?
- How does our experience in harvesting, preparing and firing the clay compare to medieval sources and what may have been created in those times? What are our limitations? Did our experience ‘feel medieval’? Why or why not?
Throughout our little clay adventure, we will keep these questions in mind to think about and reflect on during the entire process.
Materials:
- Clay harvested from family farm in Duncan – Alex has harvested this clay and worked with it previously so we know where to look and how to dig for it
- Sand from river bed as a temper for the pottery (If the river is too high to collect sand safely, we will use play sand purchased from Canadian Tire)
- Firewood and fire pit (located at the farm) to fire the pottery in
- Big bucket of water to rewet our clay and make it easier to work with
- Our own hands!
- Likely we will have some tools like stick and scrapers to add details and designs to our sculpted objects
- Finally, we will need plastic bags to cover our objects to allow them to dry slowly
The steps we will take:
- We will harvest clay from clay deposits located on Alex’s family farm using shovels and a wheelbarrow. At this stage the clay will be chunky and brittle. We will also try to collect sand from the creek bed nearby that will be used as temper for our pottery. If the river bed is too high to reach the sand, however, we will substitute with play sand from Canadian Tire.
- Processing the clay – this involves kneading the clay and squishing it together to make it more workable and cohesive. We will likely need to pick some rocks/roots/debris out of the clay at this point. Allowing the clay to dry more and/or adding water to the clay will also make it more workable.
- Shaping the clay – we will shape the clay into various objects yet to be determined. We imagine we will make some bowls, plates, cups, and maybe some other objects that will be more fun/decorative depending on how much time we have.
- Allowing the clay to dry – from conversations with friends who create pottery in their own time, we know that it is crucial to allow the clay to dry slowly and completely before firing it. Previously, Alex has learned this through error that resulted in her clay objects breaking and exploding in the fire, and we are hoping to avoid that. We will keep our clay objects covered to let them dry slowly, and give them at least a week to dry out completely.
- Firing (this will likely happen a week or two later so Alex will most likely take the lead on it at the farm) – we will create an outdoor fire in our fire pit and make it as large and hot as possible to allow the fire to reach a high enough temperature. When Alex has experimented with this in the past it was possible but required a lot of stoking and firewood, as well as carefully placing the objects as close to the embers as possible. We will most likely place the objects in the fire for a few hours and then let the fire burn down and cover it overnight so that the objects are trapped in the heat of the embers.
- The final step will be the following morning, pulling the objects out of the ashes. There will likely be a colour change to indicate if the clay has become pottery; we will also be able to hear the difference by flicking the objects with a finger and listening to the sound it makes. Alex will bring the objects back from Duncan for us to assess and analyse.
That is our plan! We have found a few YouTube videos we will likely consult whilst at the farm to figure out the best ways to shape our natural clay into bowls, plates, cups, or other objects commonly found on archaeological sites. The above video is more geared towards prehistoric pottery, but many of the techniques and information are still relevant, plus we just like looking at his silly little vest.
Wish us luck!